Re: Auto to 4-speed conversion

[Howard R Pletcher <n9ads@domain.elided>]

On Thu, 08 Apr 1999 22:24:17 -0500 Scott Machalk <smachalk@domain.elided>
writes:
>>>> 4. Am I going to have to change driveshafts?
>>
>>Maybe.  You *should*.  The 727 has a 1" shorter rear 'shaft and 1"
longer 
>>front driveshaft.<snip>
>
>Ok, then the shafts out of the parts truck would work here too?
>

Tom's advice on the bellhousings being interchangable is correct.  But
I'm not sure whether the parts truck drive shafts will work or not--only
if the 3 and 4 speeds are the same length, which I don't know the answer
to, but I'd expect the 4 speed to be a little larger.

Howard Pletcher
Howteron Products Scout Parts

___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]