Stag/Stag Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: TR3 head removal

To: [email protected], [email protected]
Subject: Re: TR3 head removal
From: MMoore8425 <[email protected]>
Date: Wed, 31 Dec 1997 23:17:27 EST
Content-transfer-encoding: 7bit
Content-type: text/plain; charset=US-ASCII
Organization: AOL (http://www.aol.com)
Sender: [email protected]

But remembering of course how tender the starter drive is on the early TR2-3A
, and besides kinda hard to get. I think I MIGHT try using a jam nut on top of
the nut on the head stud and see if I could unscrew the studs from the block.
I might put a lot of Liquid Wrench down the holes in the head where the studs
are siezed first and let it soak. 

Regards, and Good Luck,   Mike Moore

Follow-Ups:
- Re: TR3 head removal
  - From: "Glenn A. Merrell" <[email protected]>

Prev by Date: stag owners and clubs down under
Next by Date: Re: Smith gauges
Prev by thread: RE:stag owners and clubs down under
Next by thread: Re: TR3 head removal
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index