RE: Dashwood

To: [email protected]
Subject: RE: Dashwood
From: Glenn Hackbarth <[email protected]>
Date: Tue, 28 Oct 1997 15:49:22 -0700 (MST)
Content-type: text/plain; charset="us-ascii"
Sender: [email protected]

When I changed from auto to manual tranny I found it impossible to find a
console panel for the shifter.  I THINK I ended up laminating ash onto baltic
birch plywood.  Tried various stains/polyurethane on scraps before settling
with the right combination.  It's really pretty convincing.  So I guess
that the
best advice I would give is go to a good hardwoods supply that has a variety
of laminates and work it until it looks right.

TooScents........g

Glenn Hackbarth
School of Music
Arizona State University
Tempe, AZ 85287-0405
********************
Voice: 602-965-3170
Fax:  602-965-2659
Snailmail: as above
Email: [email protected]
http://www.public.asu.edu/~glennh

Prev by Date: Re: What wood is it?
Next by Date: Discard this message
Prev by thread: Re: What wood is it?
Next by thread: Discard this message
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index