Re: [ihc] bearing roller RPM

["Jim or Ginger Aos" <jaos@xxxxxxxxxxxxxxxxx>]

----- Original Message ----- 
From: "James Lidberg" <jameslidberg@domain.elided>
To: <ihc-digest@domain.elided>
Sent: Tuesday, March 16, 2004 9:01 PM
Subject: [ihc] bearing roller RPM


> I just eyballed the front wheel bearing rollers and measured that they
rotate about 3.5 to 3.75 times each inner race
> rotation.
>
> So, if the wheel is rotating about 700 RPM the little rollers are about
2600 or so.

Oops!  I see what you were talking about.  Not the rotation around the race
but the rotation of the individual rollers rpm.  My previous statement was
only true for what I said, but not true for what you asked.  Slightly
embarrassed  Jim
>
> Morey's grease states that 5000 is the limit for small bearing RPM.
>
> - Jim in Mesa
> **************
> Jim In Mesa - James Lidberg
> jameslidberg@domain.elided
> '79 Scout II/4X4/345/Edelbrock 1400/727/D20/3.07 open/PS/PB/4"Trailmaster
> Copyright 2004 All rights reserved