IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [ihc] Center pins
I think my Traingle springs took 3/8".
I bought them at NAPA and had to grind down the heads to fit the hole in the axle spring pad.
After I added shims I needed to make some custom pins.
Next time I will use grade 8 all thread with the tall nuts (available at bolt & fastener houses), and grind the nuts to
fit.
- Jim in Mesa
From: "Ryan Moore" <[email protected]>
To: [email protected], [email protected]
Copies to: [email protected], [email protected]
Subject: [ihc] Center pins
Date sent: Tue, 23 Dec 2003 16:56:06 -0500
Send reply to: "Ryan Moore" <[email protected]>
>
> My question is: what size is the center pin, or bolt or whatever you want
> to call it?
+++++++++++++++++++++++++++++++++
COPYRIGHT 2003 James M. Lidberg
[email protected]
ALL RIGHTS RESERVED
++++++++++++++++++++++++++++++++
Home |
Archive |
Main Index |
Thread Index