Re: [ihc] rotors

["James Lidberg" <jameslidberg@xxxxxxxxx>]

did google search on: W200 rotor

http://www.google.com/search?hl=en&lr=&ie=ISO-8859-1&q=W200+rotor&btnG=Google+Search

found this site:
http://www.uglytruckling.com/09_brakes_w100.html
"Dimensional data

Rotor OD 12.5"                  Caliper pin hole spacing 7 1/64"

Rotor depth 2 13/16"             Pad thickness .390" 

Rotor thickness 1.285"

Rotor mount flange dia. 7 7/8"

Rotor casting # 4476

8 bolt holes on 6.5" dia."

- Jim in Mesa



From:           	"Beijer, P.A.C." <P.A.C.Beijer@domain.elided>
To:             	"'ihc@domain.elided'" <ihc@domain.elided>
Subject:        	[ihc] rotors
Date sent:      	Tue, 16 Sep 2003 10:09:57 +0200
Send reply to:  	"Beijer, P.A.C." <P.A.C.Beijer@domain.elided>

> Hi all,
> 
> I want to convert the front hubs of my '74 200 2WD to accept rotors from a
> Dodge W200. I have an old rotor that came off of an W200 with D44 axle for
> measurement and that one looks like it can be made to fit.
> But the W200 also came equiped with a D60 and the rotors for that one are
> way cheaper. The dimensions of the actual disk are almost the same as for
> the D44 but I don't know about the height and other dimensions. Does anyone
> have one of those lying around for measurement.
> 
> Thanks,
> Paul
> --
> 
> 


**************
Jim In Mesa - James Lidberg
jameslidberg@domain.elided
'79 Scout II/4X4/345/Edelbrock 1400/727/D20/3.07 open/PS/PB/4"Trailmaster
Copyright 2003 All rights reserved