Re: Torque Convert to Flexplate

To: Doug Rasmussen <[email protected]>
Subject: Re: Torque Convert to Flexplate
From: [email protected] (John A. Landry)
Date: Wed, 09 Jun 1999 05:42:46 GMT
Cc: Tom Mandera <[email protected]>, Digest <[email protected]>
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <[email protected]>
References: <[email protected]>
Reply-To: [email protected] (John A. Landry)
Sender: [email protected]

At a recent NATO press briefing, Doug Rasmussen <[email protected]>
was heard threatening Yugoslav President Slobodan Milosevic...

>  I think they have a non-symetrical bolt pattern....it only goes together
>one way and you haven't aligned it that way, yet.

Tom,

Doug is right.  The TC only bolts the flex plate in one orientation.  The IH
shop manual warns you to mark the relationship prior to removal to aid in
reassembly later.  You just discovered the reason! <grin>  Keep spinning it
around and trying the alignment until you hit it right.

Have fun,

John L.
-------------------------------------------------------------------------- 
jlandry AT halcyon DOT com       | 
Conservative Libertarian         |  ...in hunting,
Life Member of the NRA           |            whatever is unnecessary
WA Arms Collectors               |                         is a nuisance.
Commercial Helicopter - Inst.    |
http://www.halcyon.com/jlandry/  |                      -  T. S. Van Dyke

References:
- Re: Torque Convert to Flexplate
  - From: Doug Rasmussen <[email protected]>

Prev by Date: Re: Custom Radiator Mount
Next by Date: Re: Starter Problem-Continuing-Wagonmaster
Prev by thread: Re: Torque Convert to Flexplate
Next by thread: Re: Torque Convert to Flexplate
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index