Still no brakes

[Curt Cleavinger <rcleavin@domain.elided>]

Hey Binders!

Well I replaced the master cylinder, and rebled (I bench-bled the master
cylinder before installing it, made sure the little button on the 
proportioning valve was depressed the whole time, and I also removed the 
rear calipers and tilted them up so that the bleeder screws were at the 
top and pointing upward), and it's still the same - the brake pedal goes 
right to the floor with little or no resistance. Can proportioning valves 
go bad (has anyone tried any of the adjustable proportioning valves from
Jegs - they've got several)? I'm not sure where to go from here - anyone 
have any suggestions. 

Thanks,
 Curt
   rcleavin@domain.elided  San Diego, CA
   Binder Bunch: http://www.off-road.com/~jweed/binder.htm
   Scouts West: http://www.scoutswest.com
    .===============.   __/  \        __
    ||             ||  / / ^  \  /\__/  \      __
 []_||_____________||_[]    ^  \/   / ^  \__  /^ \
  \/-----------------\/  ^ /    \ V    \ /  \/  ^ \
  ||( )| | | | | |( )|| /    /^\ \ \   /  ^ /   __________
  | ----------------- |     / ^ \  ^\  /   ____/__|__|____\
 [/\_@@_==/MMM\==_@@_/\]     /   ^\       | _          _   |
 [[_______|=s=|_______]]                  `' `--------' `--'
 [/</]   \_/       [\>\]                   `-'        `-'
 [/>/]             [\<\] '75 Scout II     '75 Travelall 150