IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re[2]: Headgaskets, Improved cooling???
John, and others,
I already have fel-pro gaskets on the valve covers.
What else comes in the kit? Basically I should order the 392, AND the
345 kits and make sure that there is a difference, then return the 345
set?
I'll look at them maybe tonight at the store.
I'm really dreading this job.
-Joel
____ Reply Separator _________________________________
Author: [email protected] at mime
Get the kit... the valve covers will leak eventually. <grin>
> What happens with the IC/non-IC stuff. My guess is that the 392 in
> the '75 is the Improved Cooling?
Definitely.
> Which holes am I looking for?
There will be long cooling passageways (slots) at the back of each block
deck on the IC model. The IC gaskets work in such a way as to properly
seal these passageways, whereas a non-IC gasket will leave part of these
slots un-sealed.
> Should I just make sure that the holes in my 392 are different from
> the 345 which was non-improved-cooling?
Using a 345 is an excellent way to compare.
John L.
RFC-822-headers:
Received: from CONVERSION-DAEMON by mail.hac.com (PMDF V5.1-12 #26580)
id <[email protected]> for "joel m brodsky"@domain.elided; Tue,
18 May 1999 11:12:41 -0700 (PDT)
Received: from PROCESS-DAEMON by mail.hac.com (PMDF V5.1-12 #26580)
id <[email protected]> for "joel m brodsky"@domain.elided; Tue,
18 May 1999 11:12:38 -0700 (PDT)
Received: from fw-es05.hac.com by mail.hac.com (PMDF V5.1-12 #26580)
with ESMTP id <[email protected]> for
"joel m brodsky"@domain.elided; Tue, 18 May 1999 11:12:35 -0700 (PDT)
Received: from mail4.halcyon.com ([206.63.63.62])
by fw-es05.hac.com (8.9.1/8.9.1) with ESMTP id LAA13992 for
<[email protected]>; Tue, 18 May 1999 11:16:04 -0700 (PDT)
Received: from tac-lx100-ip12.nwnexus.net
(tac-lx100-ip12.nwnexus.net [206.63.43.12]) by mail4.halcyon.com (8.8.8/8.8.8)
with SMTP id LAA28665; Tue, 18 May 1999 11:15:45 -0700 (PDT)
Date: Tue, 18 May 1999 18:15:49 +0000 (GMT)
From: [email protected] (John A. Landry)
Subject: Re: Headgaskets, Improved cooling???
In-reply-to: <[email protected]>
Reply-to: [email protected]
Message-id: <[email protected]>
MIME-version: 1.0
X-Mailer: Forte Agent 1.5/32.452
Content-transfer-encoding: 7BIT
References: <[email protected]>
Home |
Archive |
Main Index |
Thread Index