Re: Twisting front axle, etc

To: [email protected] (David Willmon)
Subject: Re: Twisting front axle, etc
From: [email protected] (Daniel Nees)
Date: Sun, 2 May 1999 12:41:31 -0400 (EDT)
Cc: [email protected] (IHC List)
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: "David Willmon" <[email protected]>'s message of Sun, 02 May 1999 11:04:14 -0600
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

David,
   I can't speak to the 800 urethan bushings, but the Scout II bushings
have the flange, but the sleave is long enough, for the most part. (It
is short by one flange width) When you tighten the shackles down on the
SII you just tighten them till they are snug, maybe 25ft-lbs. The bolt
wants to turn in the sleave, if you make the shackle bolts to tight the
shackle won't flex right, it will be to stiff.

_____Dan Nees_____
[email protected]

Good, getting a new heart.
Bad, growing UP.
Ugly, about to under go complete reconstructive surgery.

http://members.tripod.com/~IHCaholic/scoutindex.html

http://www.triplediamond.org

Prev by Date: Twisting front axle, etc
Next by Date: Brake Booster
Prev by thread: Twisting front axle, etc
Next by thread: 345 to 392
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index