IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Howard's viscious tongue lashing, and my poor memory <vbg>.
On Wed, 28 Apr 1999 08:14:07 -0500 "Eppinger.Michael"
<[email protected]> writes:
>
>> You've been around Scouts long enough you should recognize an
RA-18--Dana
>> 44 open diff.
> [Eppinger.Michael] <head hung in shame> your right, I should
have
>recognized this. But in all fairness, wouldn't the scout axles be
differant
>widths than the truck axles? But they used the same code on both? I
wonder
>if there are any travelalls running around with narrow scout axles
<grin>
>
>
Actually, the answer to your question is almost yes--there is a pickup
that was built using a Scout rear axle and it's a really strange looking
truck. The predecessor to the C-900 pickup which was the "El Cheapo"
pickup with a 4-152, 3 speed, and a 6' box was a C-99 pickup, built at
Chatham and sold only in Canada for a year or two. This actually used
the Scout rear axle which was noticibly narrower than the front and had a
slab-sided bonus load box that looked quite crude. I think it was a
home-brew job much like the Wagonmaster's origin.
This is one of the few vehicles that I can think of that Crismon didn't
include in his book, but then there probably wasn't any info on it in the
archives for him to see. There is/was a restored one at Southland
International in Lethbridge, AB for anyone who wants to go see one.
You aren't part Canadian by chance?
Howard Pletcher
Howteron Products Scout Parts
___________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com/getjuno.html
or call Juno at (800) 654-JUNO [654-5866]
Home |
Archive |
Main Index |
Thread Index