IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: helo question

To: "Daniel Nees" <[email protected]>, <[email protected]>
Subject: Re: helo question
From: "Thomas J. Harais" <[email protected]>
Date: Fri, 16 Apr 1999 22:46:26 -0700
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;charset="iso-8859-1"
References: <[email protected]>
Reply-To: "Thomas J. Harais" <[email protected]>
Sender: [email protected]

Dan:

GM has taken to "gluing" their door hinges on with a heat setting glue. Go
look at a new Chevy truck. You'll see no bolt heads or nuts on the hinge
plates. thier just flat steel stock. It's glue between them and the door
jamb that holds them on.

So, this stuff has got to be around. Body shops would need it to do 'factory
repairs'.

Tom H.

References:
- helo question
  - From: [email protected] (Daniel Nees)

Prev by Date: Re: impossibly low gearing
Next by Date: Fw: Re: t-case machine shop
Prev by thread: helo question
Next by thread: Re: helo question
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index