RE: Rear wheel bearings

To: "IH Digest" <[email protected]>
Subject: RE: Rear wheel bearings
From: "Kurt Musgrave" <[email protected]>
Date: Wed, 7 Apr 1999 22:35:54 -0600
Content-Transfer-Encoding: 7bit
Content-Type: text/plain;charset="iso-8859-1"
Importance: Normal
In-Reply-To: <v01510106b331c059f7bb@[204.132.128.1]>
Reply-To: "Kurt Musgrave" <[email protected]>
Sender: [email protected]

The Dana 60 in my 68 Travelall is made just as you describe.  Has the spacer
between the axles and the adjuster on the right side.  It even has zerks at
the outer ends of the axle tube to grease the bearings.

Kurt

-----Original Message-----
From:	[email protected] [mailto:[email protected]] On Behalf Of Greg
Hermann
Sent:	Wednesday, April 07, 1999 8:44 PM
To:	[email protected]
Cc:	Tom Mandera
Subject:	Rear wheel bearings



It would seem that Tom's 44 rear axle is DIFFERENT than the type used in
the Scout 800's.

Never had seen this design in an IHC before.

References:
- Rear wheel bearings
  - From: [email protected] (Greg Hermann)

Prev by Date: Re: Rear wheel bearings
Next by Date: Re: 304 valve noise
Prev by thread: Re: Rear wheel bearings
Next by thread: Re: Rear wheel bearings
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index