Re: MSD 6A STATUS REPORT

To: [email protected] (Mike Bucher)
Subject: Re: MSD 6A STATUS REPORT
From: [email protected] (Daniel Nees)
Date: Mon, 22 Mar 1999 07:18:46 -0500 (EST)
Cc: [email protected], [email protected]
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: Mike Bucher <[email protected]>'s message of Sun, 21 Mar1999 20:29:58 -0800
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

Mike,
   I would first switch to Platinum plugs. They are garenteed for life
not to erode the electrode. If they do, just take them back for a new
set.
   Second, buy the dorrect tool for gapping plugs. It is a pliers kinda
ling that gaps the plugs, but positions the electrode so that it is
square to the center electrode rather than an angle. I've seen these in
tool stores, but the best is supposed to be the one Jacob's ignition
makes. I think Summit sells it. Cost is about $10

_____Dan Nees_____
[email protected]

1 Scout II 1979 named Good
1 Scout II 1971 named Bad
1 Scout II 1979 named Ugly 
I'm looking for a Travelall to name For a Few Dollars More. (It has to
be free the dollars are to spend on it)

http://members.tripod.com/~IHCaholic/scoutindex.html

http://www.triplediamond.org

Prev by Date: cop magnet scouts
Next by Date: Re: cop magnet scouts
Prev by thread: RE: MSD 6A STATUS REPORT
Next by thread: Re: Re[2]: MSD 6A STATUS REPORT
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index