Re: U-bolt Skid plates

To: [email protected] (Rob C)
Subject: Re: U-bolt Skid plates
From: [email protected] (Daniel Nees)
Date: Thu, 4 Mar 1999 14:00:31 -0500 (EST)
Cc: [email protected], [email protected], [email protected]
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: "Rob C" <[email protected]>'s message of Thu, 04 Mar 1999 10:47:40 PST
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

My problem with your design, Rob, aside from the thickness, is with my
5/8" rod the nut's themselves are more than an inch thick by themselves.
That would make the bottom plate close to 2". With the design I am
working out thuis will be avoided. Just hang in there when Joe and I get
a prototype done we'll include you in the run.

_____Dan Nees_____
[email protected]
Keep Scoutin' and I'll be Travelalling along!
3 Scout II's and still counting!
http://members.tripod.com/~IHCaholic/scoutindex.html

Follow-Ups:
- RE: U-bolt Skid plates
  - From: "Joe Costanzo" <[email protected]>

Prev by Date: Tank Stuff - Kream Product Info
Next by Date: Re: Springover Update, parts needed
Prev by thread: re: U-bolt Skid plates
Next by thread: RE: U-bolt Skid plates
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index