Re: Square-Bore Bolt Layout

To: "Tom and Amanda Lang" <[email protected]>
Subject: Re: Square-Bore Bolt Layout
From: [email protected] (John A. Landry)
Date: Sat, 06 Feb 1999 17:18:09 GMT
Cc: [email protected]
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <[email protected]>
References: <[email protected]>
Reply-To: [email protected] (John A. Landry)
Sender: [email protected]

In Linda Tripp's secret telephone recording, Monica and "Tom and Amanda Lang"
<[email protected]> were heard saying...

>John, the following is directly off of a 390 cfm 4-bbl from my '72 T-all 392
>engine:
>
>5 1/8 inches wide
>5 5/8 inches long (as in lengthwise to the vehicle)

Thanks a million Tom.

John L.
-------------------------------------------------------------------------- 
jlandry AT halcyon DOT com      |
Conservative Libertarian        |  Scout(R) the America others pass by
Life Member of the NRA          | in the Scout Traveler escape-machine.
WA Arms Collectors              |
Commercial Helicopter - Inst.   | 1976 Scout II Traveler "Patriot" model
http://www.halcyon.com/jlandry/ |     1977 Scout II Traveler (Parts)

References:
- Square-Bore Bolt Layout
  - From: "Tom and Amanda Lang" <[email protected]>

Prev by Date: Weld strenth
Next by Date: Re: No exhaust
Prev by thread: Square-Bore Bolt Layout
Next by thread: Welding First project
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index