IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: '76 Scout not starting woes

To: [email protected] (Jim)
Subject: Re: '76 Scout not starting woes
From: [email protected] (Daniel Nees)
Date: Wed, 27 Jan 1999 19:54:46 -0500 (EST)
Cc: [email protected]
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: Jim <[email protected]>'s message of Wed, 27 Jan 199917:57:29 -0600
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

Jim,
   I had the oportunity to put my distributer in 180 out and it took me
3 months to figure it out.
   Check which cylinder is at top dead center and set the distributer at
it. Then you can set the rotor and points to it. That is how I did it.

---------Dan Nees---------
[email protected]
2 1979 Scout II's and one 1971 Scout 810
http://members.tripod.com/~IHCaholic/scoutindex.html

Follow-Ups:
- Re: '76 Scout not starting woes
  - From: [email protected]

Prev by Date: RE: Advice needed
Next by Date: 4Wheeler Mag was (Re: Rocky Mountian IH Rendezvous)
Prev by thread: Re: SSS and soft tops, etc.
Next by thread: Re: '76 Scout not starting woes
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index