Re: Rag joint

To: [email protected] (Jeff Tarquinio)
Subject: Re: Rag joint
From: [email protected] (Daniel Nees)
Date: Mon, 25 Jan 1999 12:33:28 -0500 (EST)
Cc: [email protected] (Jeff Tarquinio), [email protected] (ihc-digest)
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: "Jeff Tarquinio" <[email protected]>'s message of Mon, 25 Jan 1999 14:41:41 -0000
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

I'm sure the Chevy is indeed two different sizes. That is the kit you
have to use for the IH's, but the stock IH set-up is two SAME sized
studs. This is what you can't buy. I guss it would be worth buying two
of the chevy kits and using both arge stds, then keeping the rubber for
a backup since the new studs are threaded.

---------Dan Nees---------
[email protected]
2 1979 Scout II's and one 1971 Scout 810
http://members.tripod.com/~IHCaholic/scoutindex.html

Prev by Date: re:Fiber floors?
Next by Date: Re: PCV valves
Prev by thread: Re: Rag joint
Next by thread: Bell housing leak
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index