Re: Warn wheel hub conversion - socket

["Bill Thebert" <bthebert@domain.elided>]

Try "Plews" brand spindle nut socket #74-333.  About $12 in better auto
parts stores everywhere.  

This part #  was published in the October 1998 Binder Bulletin article on
the subject. (Both the full-floating rear axle kit and the front hub
conversion kit were covered in the same issue, and the tool works for
both.)

Bill Thebert
The Binder Bulletin
http://www.binderbulletin.org

----------
> From: Curt Cleavinger <rcleavin@domain.elided>
> To: ihc@domain.elided
> Subject: Warn wheel hub conversion - socket
> Date: Friday, January 15, 1999 9:11 AM
> 
> To those of you who have done the Warn wheel hub conversion on your
> Scouts - where did you get the tool that fits the bearing lock rings? The
> installation instructions identify the tool (a four prong socket) as
> Snap-On PN S8695C or similar. I shudder to thing what Snap-On is 
> likely to charge - are there any "or similar" out there?
> 
> Thanks,
>   Curt