IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Comp Cam

Subject: Re: Comp Cam
From: Darrel <[email protected]>
Date: Fri, 08 Jan 1999 18:06:00 -0700
CC: [email protected]
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
References: <001101be3b67$f4082f80$2f2dfea9@w666> <[email protected]>
Reply-To: Darrel <[email protected]>
Sender: [email protected]

"John A. Landry" wrote:

>
> Federal-Mogul told me the "stock" cam they manufacture has 188 degrees of
> duration for the intake and exhaust @ .050" lift.  They had no information
> on file for the total valve lift or cam separation angle though.
>

You can figure this out yourself with a *large* degree wheel and dial
indicator.

Darrel Kline
Colorado Springs

Follow-Ups:
- Re: Comp Cam
  - From: [email protected] (John A. Landry)

References:
- Comp Cam
  - From: "Jeff Bade" <[email protected]>
- Re: Comp Cam
  - From: [email protected] (John A. Landry)

Prev by Date: Re: Comp Cam
Next by Date: Re: Comp Cam
Prev by thread: Re: Comp Cam
Next by thread: Re: Comp Cam
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index