Re: Vacuum Problems-345

To: [email protected]
Subject: Re: Vacuum Problems-345
From: [email protected] (Daniel Nees)
Date: Sun, 20 Dec 1998 13:20:14 -0500 (EST)
Cc: [email protected] (IHC Digest)
Content-Disposition: Inline
Content-Transfer-Encoding: 7Bit
Content-Type: Text/Plain; Charset=US-ASCII
In-Reply-To: "Joseph M. Shaw, II" <[email protected]>'s message of Sun, 20 Dec 1998 10:17:22 -0800
Reply-To: [email protected] (Daniel Nees)
Sender: [email protected]

Michael,
   If your brakes are as you describe then there is your problem. That
other port is leaking vacumn so that your boost doesn't work. This also
causes your engine to run very rich with a vacumn leak. This will also
cause such performance problems as you describe. I would strongly
recommend that you get a new booster valve ASAP. Also, look over all
your other vacumn hoses for cracks and or dry hard hoses and replace
them. If you were in any other state I would say to toss the hoses
altogether, but; you are still in Kalifornia.

Dan Nees
[email protected]
The
"Good" 1979 Scout II  345/auto 
The
"Bad" 1971 Scout II 304/T-18 
And the
"Ugly" 1979 Scout II 345/auto 

http://members.tripod.com/~IHCaholic/scoutindex.html

Prev by Date: Re: Vacuum Problems-345
Next by Date: Story Telling
Prev by thread: Re: Vacuum Problems-345
Next by thread: Off list
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index