Re: Vacuum Hose Routing

["Myron Ware" <cmw@domain.elided>]

Alan,
  I just had my dash off this weekend, and I remember the hoses 
being one for the line from the fuel pump, one for the main 
vacuum tube (the copper colored one) to run the motor and one 
for the smaller tube fitting used to keep the wiper retracted 
when turned off.  I'm trying to remember the exact placement of 
the lines to the switch, but can't. :(  I can check my manual 
when I'm at home if you need.  I'm pretty sure the copper tube 
connects to the fitting at the far right of the switch.  It's 
easy enough to test them by holding the motor in your hand, too! 
Of course, you need to take the wiper arm and ferrule off the 
shaft (not fun) to do that.
Myron  '68 800 4x4

original message:
> routing for the wipers: each switch has *3* hose fittings on it: 1 small
> and 2 large.  Does anyone know why there would be more than 2 and how I
 
------------------------------------------------------------------------
C. Myron Ware   Senior Prog/Analyst, CNE |  NASA Langley Research Center
Email c.m.ware@domain.elided             |  Hampton, Va   23681
http://cnb-www.larc.nasa.gov/~ware/cmw-home.html  (work) or
http://www.geocities.com/Colosseum/1370  (non-work)

Word for the day:  Dictatorship (n): a form of government
  under which everything which is not prohibited is compulsory.