IHC/IHC Digest Archive

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Towing



Good advice, Howard.  I've towed 8000# plus (Scout II loaded with spare parts
on a trailer normally used to haul an Allis-Chalmers 220) with my '79 Scout
II, 304, 727, 3.07 gears, and 31x10.50 Mickey Thompsons, stock suspension in
excellent condition.  Not a fun experience.  I'll never do it again.  As
capable as we like to think our Scouts are they've got several things working
against them when it comes to towing.   The short wheel base isn't the
greatest for stability.  All the rear overhang puts the receiver ball way back
behind the axle (something the Grand Cherokees have us beat on).  This means
lots of unwanted weight transfer to the rear axle and it gives the trailer
that much more leverage to yank the back of the truck around in cross winds.
The Scout's relatively narrow rear spring perches and lack of any kind of axle
locating device give it great articulation, but it does a lousy job of
controlling trailer sway.  Aside from the utility trailer, towing duties are
now restricted to the Travelette.

Jerry Muncie

In a message dated 10/14/98 3:09:28 PM US Eastern Standard Time,
[email protected] writes:

<< 1	5000# max. for a Scout
 2	Reduce by 20% for tires 30-32" diam
 3.	Reduce by 40% for 33" and larger tires.
 4.	Reduce by 10% for bias ply tires.
 5	Reduce by 20% for longer spring shackles
 6.	Reduce by 20% for more than a 3" suspension lift.
 7.	Brakes and an equalizer for anything over 2500#
 8.	Max speed for anything over 2500# 60 mph.
 9.	Quoting Steve Stegmann:Be Careful how you load the trailer**  
 USE A 		SCALE to be sure you have at least 10% (make that
 15%) on the tongue.  	This has a major effect on the stability of
 the trailer. (and most people are 	poor at estimating how much it
 weighs.)
 10.	Reduce by at least 50% if steering, suspension, brakes, etc.
 aren't up to 	new vehicle standards. >>



Home | Archive | Main Index | Thread Index