Distribution block

[Matt Palguta <mpalguta@domain.elided>]

Chris & Ranae Procyk <procyk19@domain.elided> writes:

I don't know how you tell the front ports from the rear ports
(where the proportioning restriction is) on the distribution block
for a Scout (anybody?)


    Do you mean the distribution block off a Scout II? (Don't know about
the 80/800's) Or was it the master cyl from a Scout II? At any rate the
rear output on the Scout II w/discs up front is the single large port
which when mounted to the inner fender on the left side, by the master
cyl, will be on the rear of the block. This feeds a single line to the
back brakes which goes into a brass "T" block at the flex hose in the
rear. Two other smaller ports go to the front calipers individually from
the distribution block.

Matt Palguta  1980 Scout II  carbless