IHC/IHC Digest Archive
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: questions
The black helicopters hovering over the house recorded "Dan Nees"
<[email protected]> whispering:
> My questions are this, I need to get the choke hooked up some how. I
>don't have the divorsed choke set-up on my 71 304 intake, I have a
>manual choke that is now to short to reach around the other side of the
>carb. Is there some way to rig this cable to work? How difficult is it
>to replace the cable on my choke? Can I put a new cable on my choke
>knob? I don't wan't to change the knob and stuff because it matches.
Dan,
If your stock choke knob is removable like the other IH dash knobs (a set
screw in the knob base), then replacement of the inner wire cable is a
snap. However, because the outer cable sleeve is probably too short also,
most likely you will need to replace the entire choke cable assembly. New
cable assemblies are available at almost any good auto parts store for
$10.00 or under. I think I bought mine through Summit when I ordered my
Edelbrock carburetor for under $4.00. I bought one to add to my 76
Traveler which never had a manual choke before. Like Tom M., I simply cut
off the cheesy choke knob supplied with the replacement cable assembly and
stuck an IH one on. All you need do is drill a little hole in the choke
cable shaft using the knob as a template guide. The IH choke knob will
then slip on the shaft and the set screw will hold it in place. Once
you're done, you can't tell it from the original. It's really easy to do.
A little more fun... You will also need to fabricate (or move the old one)
a bracket to hold the choke cable outer sleeve near the right side of the
carburetor where the choke control is. Then you just figure out a simple
way to attach the choke cable wire to the Holley's choke control and you're
all set. A nice weekend afternoon project for you is all! <grin>
Have fun,
John
------------------------------------------------------------------------
[email protected] |
Conservative Libertarian | Scout(R) the America others pass by
Life Member of the NRA | in the Scout Traveler escape-machine.
WA Arms Collectors |
Commercial Helicopter - Inst. | 1976 Scout II Traveler "Patriot" model
http://www.halcyon.com/jlandry/ | 1977 Scout II Traveler (Parts)
Home |
Archive |
Main Index |
Thread Index