Re: gaskets

To: "Abrusci, Mike (NM75)" <[email protected]>
Subject: Re: gaskets
From: [email protected] (John A. Landry)
Date: Thu, 18 Dec 1997 21:07:35 GMT
Cc: [email protected]
Content-Transfer-Encoding: 7bit
Content-Type: text/plain; charset=us-ascii
In-Reply-To: <c=US%a=MCI%p=honeywell%[email protected]>
References: <c=US%a=MCI%p=honeywell%[email protected]>
Reply-To: [email protected] (John A. Landry)
Sender: [email protected]

On Thu, 18 Dec 1997 07:36:42 -0700, "Abrusci, Mike (NM75)"
<[email protected]> wrote:

>I am going to replace my intake manifold gasket this weekend and they
>sold me a metal one and FelPro says to use goop. Is this right? 

Yes... amazingly this combination actually works!  You smear a thin film of
the special sealer to each side of the steel gasket and let it become
tacky.  If you carefully lower the intake manifold in place, the gasket
will stay in place held by the tacky sealer.  Follow the directions that
came with the gasket carefully.  Works like a charm.

Happy holidays,

John
------------------------------------------------------------------------
[email protected]             |
Conservative Libertarian        |  Scout(R) the America others pass by
Life Member of the NRA          | in the Scout Traveler escape-machine.
WA Arms Collectors              |
Commercial Helicopter - Inst.   | 1976 Scout Traveler, V345A, 727, 3.54
http://www.halcyon.com/jlandry/ |

References:
- gaskets
  - From: "Abrusci, Mike (NM75)" <[email protected]>

Prev by Date: Re: Tom's not old???
Next by Date: Re: Front axle nuts
Prev by thread: gaskets
Next by thread: Re: 4 Speed Ratios
Index(es):
- Date
- Thread

Home | Archive | Main Index | Thread Index