[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: 2.5 vs. 2.7L
- Subject: Re: 2.5 vs. 2.7L
- From: "Rob" <motor@xxxxxxxxxxxxx>
- Date: Tue, 19 Jan 1999 11:08:51 -0700
Hello,
despite what others *may* say or caution you against, the 2.7L ETA cast
crank will work fine. If you use a Schrick (or other) cam you should have a
header as well.
I'd stick to the 272 cam.....the 288 kills too much bottom end on a heavy
"ic", unless you install a 3.91 or 4.10 rear end.
Good luck
Rob
[email protected]
------------------------------