[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
<E30> HELP Can not get at top transmission Torx Blot
- Subject: <E30> HELP Can not get at top transmission Torx Blot
- From: "Koehler, Erik" <Koehler@xxxxxxxxxx>
- Date: Mon, 30 Nov 1998 09:16:57 -0500
a twelve point box end wrench will work, if i remeber correctly you will
need an 8 and 11 mm, i believe for the bolt you are attempting to get to an
11 mm will do the trick. good luck.
- -erik
>>Date: Sun, 29 Nov 1998 08:03:17 -0800
>>From: "Zaphod & Trillian" <[email protected]>
>>Subject: <E30> HELP Can not get at top transmission Torx Blot
>>Does anyone know how to go about removing the top toxr bolt that is on the
>>drivers side
>>of the transmission?
>>You can just see it from the engine compartment but to remove it that way
>>would require
>>a torx box end wrench. Does any one make one or is there some special
trick
>>to removing
>>that bolt?
------------------------------