[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Speed Bleeders
- Subject: Speed Bleeders
- From: "Steve D'Gerolamo" <steved3@xxxxxxx>
- Date: Fri, 23 Oct 1998 07:47:12 -0400
I looked into these awhile back. I can't see that they're DOT or TUV
approved and I didn't want to risk a liability issue in the event that one
of these failed while installed in a customer's caliper. In addition, you
still run the problem of over-extending the travel of the brake master
cylinder when you push the brake pedal to the floor, potentially causing a
marginal m/cyl seal to fail. I personally will stick to pressure bleeding. SD
=========================================
Steve D'Gerolamo - The Ultimate Garage
201-262-0412 / [email protected] / http://www.ultimategarage.com
------------------------------