[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
re: 02 Turn Signal Question
- Subject: re: 02 Turn Signal Question
- From: Mpotheau@xxxxxxx
- Date: Sat, 12 Sep 1998 09:21:29 EDT
It was written:
>I've got a '73 02. When you use the right turn signal, the indicator on
>the dash flashes once or twice and stops, the actual signals continue
>to work normally until the turn is complete.
The solution is not the turn signal relay. The problem is a poor ground on the
right turn signal. Changing the relay might correct this temporarily , but
making sure there is a good ground is the real solution. If the screws holding
it on are rusty -or go into a very rusty fender, don't be bashful about
drilling a hole in the top of the turn signal housing and establishing a new
ground to the chassis.
Circle Tire Co. (We don't sell tires),
Michel Potheau BMWCCA#0000002 BMW Club France #0000013, [email protected],
Enjoy your BMW,
http://www.boston-bmwcca.org/internet-highway
------------------------------