[Prev][Next][Index][Thread]
Re: brake fluid bleeding/changing addendum
-
Subject: Re: brake fluid bleeding/changing addendum
-
From: "Ahsun H. Murad" <[email protected]>
-
Date: Thu, 27 Oct 1994 20:49:53 -0400
- -------------------------------------------------------------------
> Frank ([email protected]) writes:
>
> I've got a brake fluid reservoir cap with a screw-in (i.e. metal)
> tire valve in it. I use a small compressor to pressurize the
> reservoir to about 20 psi and let that pressure purge the lines of
> the old fluid and replace it with new.
Can the stock plastic reservoir stand that much pressure? Or does that
have to be changed too. Also, does this work with ABS? Thanks.
Ahsun
- -------------------------------------------------------------------
Ahsun H. Murad ([email protected])