[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bmw] Re: Odd question, Brake Reservoirs
Alex,
I don't know if this will help or not, but I know that the cap on the brake and clutch fluid reservoirs on my Alfa Romeo Spider both screw onto the reservoir on my old E-30. I also know that any modern bmw or Alfa used the same type of reservoir cap as any other bmw or alfa. I think you might try looking at other european cars for options as well. It seems like they all tend to use one of only a couple of brands of brake parts. . .ATE being the most common. I also seem to remember that late model 540's have the Brake master located in a wierd spot right behind the headlights due to a cramped engine bay (I could be wrong on the model, might have been a 7, but I'm pretty sure it was a V-8 car from late nineties or later), I don't remember if the reservoir is on top or not.
Sorry I can't tell you which car to check specifically, but I hope this helps. . .
Jake Hahn
93 BMW 318i
In a message dated 1/22/2004 10:00:20 PM Eastern Standard Time, [email protected] writes:
> List:
>
> I'm looking for a BMW brake fluid reservoir that has a pair of nipples on one
> side, at the bottom, but doesn't have any openings on the bottom, to perch on
> the master cyclinder.
>
> If it has a third nipple on one side that was designed to feed the clutch
> slave, thats fine.
>
> Basically, due to cage restrictions, I can not mount the reservoir ON the
> master brake cylinder, but it will have to be displaced to one side. I managed
> to find a pair of elbow inserts that will plug into the top of the master
> nicely, and have nipples to go to a hose, now, I need a matching reservoir. I
> prefer to buy a bmw one, so that I can continue to use the brake pressurizing cap
> I have with my brake bleeder kit.
>
> replies in private are fine. I'm sure there is some older model BMW that
> didn't mount the reservoir right on top somewhere.... I
> just don't know which
> one!
>
> Alex Lipowich
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to [email protected]