[bmw] Re: torque wrench

[KanistaZ@xxxxxxx]

Also, if you have access to an impact wrench and air compressor, you can use 
a torque stick, which works in conjunction with an impact wrench, and are 
available in a variety of torque settings.  They are quite accurate, and will not 
allow the wrench to torque beyond the specified spec.

Ken Mitchell
Durham, NC

In a message dated 12/3/2003 5:24:49 PM Central Standard Time, 
owner-bmw-digest@domain.elided writes:


> Date: Wed, 3 Dec 2003 13:47:59 -0500
> From: "David Orr" <orrs@domain.elided>
> Subject: Re: [bmw] Torque wrench
> 
> Gerry,
> 
>      A torque wrench is the only proper way to tighten your lugs
> properly.  If you use an air wrench they will be way too tight and
> as you know hard to remove.   Also an air wrench can stretch the
> studs past their yeild and cause them to break.  I would recommend
> buying one or borrowing one when you put your wheels on.  Auto Zone
> loans tools out so you might be able to borrow one from them.  You will
> also want to retorque then periodically.
> 
> Good luck and happy motoring!
> 
> Dave Orr
--
to be removed from bmw, see /bin/digest-subs.cgi
or email "unsubscribe bmw" to majordomo@domain.elided